Description
The FPGA mining board, Imperium V2 has three FPGA hashing boards. There are four KU040 FPGA chips on each board, which runs at 1.0V core voltage. Imperium miner has a dedicated core power supply with a maximum load up to 60A. Bitstream is configured via a serial interface which is driven by a controller board. Each board has a micro-controller chip to chain four FPGA devices. This FPGA mining board looks similar to ASIC and has a similar interface with ASIC miner.
Board temperature can be monitored instantly by the host board with the onboard sensor. Fan cooling is supported. Power indicator LED, FPGA configured LED, and Mining status LEDs are available onboard.
Bitstreams
| Algorithm | Coin | Hashrate | Power | |
|---|---|---|---|---|
| handshake |
 HNS |
5.3 GH/s | 750W |
|
| blake2s |
 KDA |
12 GH/s | 750W |
|
| 0xtoken |
 0xBTC |
30 GH/s | 1000W |
|
| vblake |
 VBK |
18 GH/s | 750W |
|
| eaglesong |
 CKB |
23.4 GH/s | 750W |
|
Resources and Tools
| Downloads | Detail |
| ⬇️ Bitstream | Download the bitstreams and miners here |
